Perimiter Detection Systems


Products

StarLED 200 

Description

StarLED 200 is a solid-state infrared LED illuminator that creates light which, while invisible to the naked eye, is visible to standard infrared-sensitive CCTV cameras. It provides the most uniform coverage and the longest-range infrared LED illumination available. It has the lowest life cycle cost because of its 10-year life expectancy, its low power consumption, minimal heat generation and long life LED's.

* Invisible Infrared light for use with CCTV cameras * Covert * Ideal for VIP sites * Longest Range of any LED IR illuminator
* Uniform coverage over an extended range

Contact us for futher details ››


MPS 4100  

Description

The Intelli-Wave microwave intrusion detection sensor is a volumetric, high-performance system that creates a microwave field between transmitter and receiver units to detect intruders based on their size and speed. It is cost-effective and easy to install.

* Variable Separation 3 to 183 m (10 to 600 ft.) * Horizontal and Vertical Polarization * 6 Field-Selectable Modulation Frequencies * Preamplification of Receiver Signal.



Contact us for futher details ››


Bistatic Microwave Intrusion Detection System  

Description

The Series 14000 is a long- range, narrow beam intrusion detection system, that provides invisible volumetric microwave perimeter protection for distances up to 457 m (1500 ft.). The Series 14000 is not affected by rain, snow, wind or other sources of nuisance alarms.

* Zone length up to 450 m (1500 ft.) * Simple Installation * Audio output for trouble-shooting * 6 Field-Selectable Modulation Frequencies.


Contact us for futher details ››


MPS16000  

Description

The Series 16000 microwave sensor is a volumetric perimeter intrusion detection system. Designed for high performance,cost effective operation and ease of installation,the Series 16000 microwave sensors provide an extremely high probability of detection (Pd) with a low nuisance alarm rate (NAR)in nearly any situation.





Contact us for futher details ››


MPS24000  

Description

The Series 24000 microwave sensor is a volumetric perimeter intrusion detection system. Designed for high performance,cost effective operation and ease of installation,the Series 24000 microwave sensors provide an extremely high probability of detection (Pd) with a low nuisance alarm rate (NAR)in nearly any situation.





Contact us for futher details ››


Next Page ››