Perimiter Detection Systems
Products
 |
XField - Electrostatic Field Disturbance SensorDescription Repels® is a portable outdoor security sensor that operates like a radar fence. It creates an invisible electromagnetic detection zone along the path of two parallel cables that are supported by poles driven into the ground. Repels is designed specifically for perimeter protection and has none of the limitations of line-of-sight sensors. The system can be installed in any terrain and can handle perimeters of any shape. Repels performs as well on hills, wooded areas, and around corners as it does in flat, straight applications. One unit protects a perimeter of 100 m (328 ft). Multiple units can be linked to cover longer distances. When the cables are mounted 15 cm (6 in.) and 1.2 m (4 ft.) above ground, the resulting detection field is typically 2 m (6.6 ft.) wide, centered on the plane of the cables, and 2 m (6.6 ft.) high. The system takes less than 30 minutes for one person to set up. Once the support poles have been placed in the ground, the required amount of cable is reeled out of the processor unit. No cable cutting, connections or fine tuning is required. Once the system is in place, it is ready to use. Simply turn on the power. Like Senstar-Stellar's other outdoor perimeter sensors, Repels is largely unaffected by small animals, foliage or the environment, resulting in low false and nuisance alarm rates and a high probability of detection. Repels features a battery powered transmitter and receiver capable of operation for five months or more, along with a soil deployment kit. |
 |
PAS - Personal Alarm System for Emergence ResponseDescription The PAS Personal Alarm System is an ultrasonic based emergency/duress notification and communication system.Individuals moving throughout a facility can immediately identify their exact location in a crisis via thetransmitter carried with them. PAS is ideally suited for correctional applications. * Location Discrete * Fully Supervised Circuitry * Integrates Easily with Other Security Devices and Control. |
 |
FORTIS - Taut Wire Perimiter Intrusion Detection SystemDescription Fortis is a fully Integrated Command & Control System, which supports real-time decision making along with complete command and control. The system is designed to improve the response to real-time security events, by sharing video and geographical information between the control center and security personnel systems in the field. Fortis creates a unified and interactive intelligence picture - drawing data from all sensors, while displaying movements of security personnel in the field and adding other relevant information, such as video from various sources, auxiliary services and weather conditions. The instantaneous, all-encompassing picture, is sent by Central Command to all security personnel in the command chain, and serves as a unified basis for operational planning and allocation of tasks. |
 |
PipeGuard - Pipeline Security SystemDescription PipeGuard is an innovative, patent pending security system, aimed at protecting pipelines and other buried assets from terrorism, theft and third party damage. Based on state-of-the-art patent-pending embedded technologies, Pipeguard offers a unique solution to meet the tough challenge of pipeline damage prevention. PipeGuard is designed to generate an alarm - only when a real and concrete threat is identified. Sensing Units (S.U.) are installed at a distance of about 200 - 300 meters apart. They are placed along the pipe, at a depth that is in between the pipe and the surface of the ground. They can be installed either over the pipe or within offset boundaries of up to 10 meters. Each unit is an autonomous entity with a unique ID. The software can be updated with new parameters and version upgrades. Depending on the area's characteristics, PipeGuard offers several options to securely transfer the alarm message from the S.U. to the operator: wireless RF, wired, or a combination of both. |
 |
E3i - Interior Security Microphonic Cable SensorDescription The E3i™ is a break-through detection sensor used to protect the walls and roofs of buildings. It adapts Senstar-Stellar's proven strain-sensitive microphonic cable technology to the specialized requirements of detecting impacts to metal, wood or masonary materials. The sensor cable is mounted to the interior surface and is monitored for signals corresponding to shock, impact and sustained attack when an intruder attempts to cut, smash, crush or saw through the exterior surface. The E3i provides cost effective protection for warehouses, bank vaults, ammunition bunkers, weapons storage facilities and a variety of commercial and industrial establishments. * Detects shock due to impact from attempted break through * Used on walls, roofs, ceilings, stock cages, floors and pipes |
Next Page ››